What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 26.06.2025 23:46

Edit 2024–10.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
The other is “what does a “fuse” do?”
What movies and TV shows portray realistic beauty standards?
First Sentence:
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
An AC voltage/ current source, and an ac inductive load.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
(Dc diagram shown, AC is similar).
MSU Taps J Batt As Next Director of Athletics - Michigan State University Athletics
He then describes Rainy Season and Lightning.
Here is a simplified AC power diagram.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Why is the world male-dominated?
eight
A fuse is a non-resetable over current circuit protector.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
What is the difference between using a brush for air drying and blow drying?
One is “what exactly is in a ‘surge protector’ ? ”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Angelina Jolie And Brad Pitt’s Daughter Shiloh Reintroduces Herself With New Name - HuffPost
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Barnstars:
so, what happens?
This is 'the assistant's answer'
Because the load is inductive, the current lags the voltage.(by a bit).
Can you wash a dog with washing liquid used for humans?
This device then solves the entire problem.
He then asserts :
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
The Nintendo Switch 2 is here: all of the launch news - theverge.com
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
In schematic diagrams this is the symbol for a fuse:
Upvotes:
24 Tech Products You'll Want To Add To Your Routine ASAP - BuzzFeed
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
I post the exact comment here.
Are there any industries or sectors where ChatGPT is particularly well-suited for implementation?
The third is lightning and “how it gets conducted into a home.”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is where this question deviates from being a 'generic' question, and becomes more specific.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
So, the voltage could go up to 500 volts, and the fuse will not open up.
What is lightning?
Now when you have a certain ac resistance, then a current flows in a loop.
He then describes the function of a fuse.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
But it can get overloaded, and no longer works.
These devices are installed between the “hot” and “neutral” and protective ground.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
It seems Mohan does not understand the difference between a comment and an Answer.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
There are three different concepts here that are getting confused.
[image of Common-mode choke]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
the problem then depends on "how fast does the fuse operate?".
but this device (an Inductor) … impedes the rapid changes in the current.
There are two important concepts here.
One
a photo is worth a thousand words.
This one hit behind the barn.
2024–10–14 [Omar Gharbi Omar Gharbi ]
What does a fuse do?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
nine
These are simplified answers to the original question, and does not change anything I wrote above.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
At least they know the answer if they wanted it.
2024–10–10[John johnson John Johnson ]
The bolt then partially travels down the line to your home.
A circuit breaker is similar, but is resettable.
but I think this circuit , shows a few more pieces.
[old diagram got deleted by accident]
It also is a device that limits the change in current flow.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
what exactly is a ‘surge’ protector?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
At one ohm, the resistor has a maximum of 1 watt power.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–16 [ OO OLAOYE OYEBODE ]
But… the neutral is now “floating” because of the 1 ohm resistance.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is where the MOV conducts again, and dissipated the energy.
The MOV will conduct when the voltage exceeds 50% of line voltage.
For this case there are devices called Metal oxide varistors (MOV).